23 Jun 2019
June 23, 2019

SkimCoat

0 Comment

Skim coating is a texturing technique used to make a wall smooth. Drywallers use this technique to hide an imperfect taping job, to give the wall a plaster-like appearance and in situations when only the smoothest surface will do. Skim coating is the only way to achieve a level 5 drywall finish, which a number.. read more →

In the construction industry, the transformation of construction technology is based on the innovation of building materials. In recent years, polymer-modified dry mortar has shown a booming development in China. One of the outstanding examples is the emergence of polymer-modified dry powder tile adhesives, which is transforming the tile inlay process from the traditional thick.. read more →

27 May 2019
May 27, 2019

Starch ether

0 Comment

Starch is one of the most prolific natural polymers, and is composed of amylose and amylopectin. Amylopectin molecules are much larger than amylase. Starch ethers are chemically modified from starch. Potato starch, which is of high-purity, is the preferred amylase for building. Starch molecular weight and the degree of etherification determine the consistency and workability.. read more →

HPS (short for hydroxypropyl starch ether) enables cement- and gypsum-based products with distinctive qualities. Similar to Hydroxypropyl Methylcellulose(HPMC) in the chemical structure, it can not only provide functions similar to cellulose, but also have very good compatibility with other additives in building. starch ether has a very small amount used in mortar products, and a.. read more →

The effect of fresh mortar: The effect of hardened mortar; The specific process of polymer application in adhesive: One of the most important applications of polymer-modified cement mortar is the application of thin-layer construction methods to tile. The specific process is as follows: the dry powder adhesive with the package is mixed with water on.. read more →

17 Apr 2019
April 17, 2019

Main Types of Tile Adhesive

0 Comment

Drymix mortar for thin layer tiling has often to meet various technical requirements, such as good performance, good water retention, long open and adjustment time at high temperature, and good anti-sliding properties, etc. On the basis of the base to be tiled(such as concrete surface, brick structure, lime-cement plastering primer, plaster, wood, old tile surface,.. read more →

17 Apr 2019
April 17, 2019

The advantage of dry-mixed mortar

0 Comment

Dry-mixed mortar or dry mortar is made of cement, sand, mineral and functional additives, mixing together proportionally. It is often in powder or granule form pre-mixed in special factory and transported to construction site. After stirring with adequate amount of water, it can be used directly. There are usually two kinds of dry mortars- normal type.. read more →

The Water Retention Functions and Principles of Hydroxypropyl Methylcellulose The HPMC mainly plays a role in water retention and thickening, able to effectively improve the bond force and sag resistance of slurry. Air temperature, humidity, wind pressure and other factors will affect the evaporation rate of water in cement mortar and gypsum-based products. Therefore, in.. read more →

The mechanism by which concrete shrinkage cracking occurs is as follows. In setting and hardening of concrete, the volume will change and the set cement will generate heat of hydration. Due to different rates of temperature increases and decreases on the surface or in the inner part of components, shrinkage deformation of concrete will be.. read more →

29 Jan 2019
January 29, 2019

Re-dispersible polymer powder

0 Comment

Redispersible polymer powder (short for RDP) is a polymer powder with redispersible property. It is made from synthetic resin emulsion by adding other substances and then dried by spray. So it mainly contains polymer resin, additives, protective colloid, anti – caking agent. The manufacturing processes can be divided into two procedures-The first step is to.. read more →