Sulphonated Melamine Formaldehyde Resin Based Superplasticizer

SMF-10

 

SMF-10 is a Sulphonated Melamine Formaldehyde Resin Based Superplasticizer, suitable for cement-based or gypsum-based mortars that require high fluidity and high strength.

Range of Application

SMF-10 has good compatibility with different cements, gypsum cementing materials and other additives such as defoamers, thickeners, retarders, expansion agents, hardening accelerators, etc., and can give mortars quick plasticization, high fluidization effect and low air entrainment.

Recommended Application:

Flowable mortar for pouring

Flowable mortar for paving

Flowable mortar for painting

Fluid mortar for pumping

Steam curing concrete

Other dry mix mortar or concrete

Method of Use

Package into finished products after mixing with other dry powder components evenly, and use it after mixing with the recommended amount of water on site.

The recommended addition amount is 0.3-1.00% of the cementitious material, which needs to be determined in advance based on raw materials and construction specifications.

Physicochemical Property

Project	Indicator
appearance	white powder, free flowing
bulk density	400-700kg/m3
moisture content	≤5.0%
20% solution PH value 20℃	7.0-8.0
chloride ion content	≤ 0.05%
air content of concrete	≤ 3.0%
concrete water reduction rate	≥14%

Packing Specification

Packed in plastic woven bag, 25 kg/bag.

Storage Conditions

The product should be stored in a dry and clean environment in the original packaging and away from heat sources. This product is not easy to fail, but it is a hydrophilic-based product. If the storage environment is poor, it will slowly absorb water. It is recommended to follow the first-in first-out principle when using it.

If the product is not used up, the packaging must be tightly sealed to prevent moisture intrusion.

Product Safety

According to laws and regulations on dangerous goods and preparations, this product is harmless. The formation and accumulation of dust should be avoided. Scattered products should be cleaned up in a dry state. There is a risk of slipping when contacted with water. For detailed information, please contact us.